vCalc
Hydraulic calculations for sprinkler and standpipe pipe networks, either in its own desktop window or by pulling the pipe system out of a Revit model. It checks demand against supply across several design areas, updates results as you change pipe sizes or lengths, and can generate tree, grid or loop systems.
- Review no.
- RS-R755
- Revision
- B
- Read at source
- 9 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the hydraulic calc done by hand or in a spreadsheet, and drawing the system twice. Software that lays out sprinklers, risers and gas systems and proves the pipework against the water supply. Viking's vCalc runs sprinkler hydraulics from its own window or a Revit model, free to select Viking clients. The catch: check the standard it calculates to (EN 12845, NFPA 13, the Australian ones) before you trust the result, and the manufacturers' free tools work best with their own heads.
The catch
Only for select Viking clients, the maker says. Standards it follows are not named on the page.
- United Kingdom: not offered *
* As at the date read. Every listing is re-read at source at least once a month, and its links are checked every week. Get the Red Read to hear first when it changes.
What it replaces
Separate hydraulic calculation software alongside the Revit model.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with vCalc? Tell us how it went
Source and revisions
Source: vCalc, Viking
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/vcalc"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>