CYPEFIRE Hydraulic Systems
Designs and sizes water based fire networks: sprinklers, hose reels, wet and dry risers and other emitters. It takes the building from an IFC or Revit model, lays out the network, checks it to the chosen standard and enlarges pipes until pressures and flows are met. It produces drawings, reports, a bill of quantities and an IFC model back to the shared project.
- Review no.
- RS-R724
- Revision
- B
- Read at source
- 9 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the hydraulic calc done by hand or in a spreadsheet, and drawing the system twice. Software that lays out sprinklers, risers and gas systems and proves the pipework against the water supply. CYPEFIRE Hydraulic Systems lays out and sizes sprinklers, hose reels and risers from an IFC or Revit model and enlarges pipes until it passes. The catch: check the standard it calculates to (EN 12845, NFPA 13, the Australian ones) before you trust the result, and the manufacturers' free tools work best with their own heads.
The catch
Windows only. Works through the maker's BIMserver.center platform. Water mist is not named on the pages read. Price not shown.
What it replaces
Separate drafting and hydraulic calculation tools.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with CYPEFIRE Hydraulic Systems? Tell us how it went
Source and revisions
Source: CYPEFIRE Hydraulic Systems
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/cypefire-hydraulic-systems"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>