Skip to content
REDSTICK⌕
SaaSFire protectionSprinkler and fire suppression system design and hydraulic calculation

MagiCAD Sprinkler Designer

A sprinkler add-on to MagiCAD's piping tools in Revit, AutoCAD or BricsCAD. You place heads, hydrants and other parts quickly and calculate the system in the same program, then produce sprinkler reports.

Review no.
RS-R741
Revision
B
Read at source
9 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the hydraulic calc done by hand or in a spreadsheet, and drawing the system twice. Software that lays out sprinklers, risers and gas systems and proves the pipework against the water supply. MagiCAD Sprinkler Designer places heads and calculates the system inside MagiCAD Piping on Revit, AutoCAD or BricsCAD. The catch: check the standard it calculates to (EN 12845, NFPA 13, the Australian ones) before you trust the result, and the manufacturers' free tools work best with their own heads.

The catch

Needs the MagiCAD Piping module. The page lists its calculation standards for AutoCAD and BricsCAD only, not for Revit. Price not shown.

Who forMEP designers and sprinkler contractors who already draw piping in MagiCAD.
By whomGlodon (MagiCAD)asia.glodon.com ↗
Releasedto check
Sold into check
PriceNot publishedNot published on the page read.

What it replaces

Exporting the model to a separate sprinkler calculation program.

Who else does it

Compare all 10 for sprinkler and fire suppression system design and hydraulic calculation side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with MagiCAD Sprinkler Designer? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: MagiCAD Sprinkler Designer, Glodon

RevDateChange
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/magicad-sprinkler-designer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>