Vacuum Block Lifter AVBL380
A battery-powered vacuum head that hangs from a crane, hoist or lifting hook and grips a concrete block or stone slab by suction, so one person can guide it into place.
- Review no.
- RS-R1057
- Revision
- D
- Read at source
- 9 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces two men on a heavy block and the cube results a week later. Small cranes and vacuum lifters at the wall, and sensors in the pour. The AVBL380 hangs from a crane or hoist and grips a block or slab by suction for one person to guide. The catch: the cranes weigh a tonne and need 400 V, and the sensors need calibrating to the mix and someone near the pour.
The catch
Needs a crane, hoist or other lifting machine to hang from; capacity falls with smaller pads (126 kg on the narrowest).
What it replaces
Lifting heavy blocks and slabs by hand or with clamps and slings.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Vacuum Block Lifter AVBL380? Tell us how it went
Source and revisions
Source: Vacuum Block Lifter AVBL380
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/vacuum-block-lifter-avbl380"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>