Glassworker GW625
A self propelled glazing robot with six suction plates that picks up, carries, turns and sets glass and facade panels up to 625 kg, driven from a radio remote.
- Review no.
- RS-R1071
- Revision
- E
- Read at source
- 12 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces two men on a heavy block and the cube results a week later. Small cranes and vacuum lifters at the wall, and sensors in the pour. The Glassworker GW625 picks up, turns and sets glass and facade panels up to 625 kg; to buy or hire with an operator. The catch: the cranes weigh a tonne and need 400 V, and the sensors need calibrating to the mix and someone near the pour.
The catch
The maker's own page gives two different vertical mounting heights (3.10 m and 3.60 m), and the unit weighs over a tonne.
- France: through a distributor
- Germany: on sale
- Portugal: through a distributor
- Spain: through a distributor
- Sweden: through a distributor
- United Kingdom: through a distributor
- Australia: through a distributor
What it replaces
Teams of people lifting glass by hand or with hand suction cups.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Glassworker GW625? Tell us how it went
Source and revisions
Source: GLASSWORKER GW625, Uplifter
Availability read at: Australia · France · Germany · Portugal · Spain · Sweden · United Kingdom
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/glassworker-gw625"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>