GEDA Installation Designer
An online tool that calculates the anchoring and ground forces for a GEDA construction hoist or transport platform from the site's installation details, suggests the best configuration and prints the results.
- Review no.
- RS-R1569
- Revision
- C
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the lift plan worked out from the crane chart and the site layout sketched over the drawings. Planning the crane, the hoist and the site set-up before anything arrives. GEDA's Installation Designer works out anchoring and ground forces for its hoists and suggests the configuration. The catch: the makers' tools plan only their own kit, and the plan still needs the lift planner's sign-off.
The catch
Covers GEDA hoists only.
What it replaces
Working out hoist tie and ground loads by hand from the manuals.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with GEDA Installation Designer? Tell us how it went
Source and revisions
Source: Installation Designer | GEDA Central
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/geda-installation-designer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>