Skip to content
REDSTICK⌕
RobotAll tradesChecking installed work against the design model

Topcon GTL-1200

The GTL-1200 is a robotic total station with a laser scanner built in. It is used for setting out, staking and survey, and for scanning finished work to check it against the design. Topcon gives a scan range of 70 m, a field of view of 270 by 360 degrees and 200,000 points a second. Scans can be registered and checked on site with Topcon's Collage Site field software.

Review no.
RS-R2573
Revision
A
Read at source
18 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

The catch

Its 70 m scan range is short next to Topcon's own dedicated scanners, such as the CR-P1 at up to 200 m.

Who forSurveyors, setting-out engineers and contractors checking installed work on building and civil sites.
By whomTopcon Positioning Systemstopconpositioning.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedNo price published; sold through Topcon dealers.

What it replaces

Carrying a separate total station and laser scanner, and spot-checking installed work by tape and level.

Assessment

Assessment to follow. The facts on this page are read at the maker’s own source.

Who else does it

Compare all 9 for checking installed work against the design model side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Topcon GTL-1200? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: 3D laser scanner solutions for your project | Topcon

RevDateChange
A18 Nov 2026First read at source (hunt run 2026-11-19).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/topcon-gtl-1200"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>