At a glance
What it doesDesktop software that lines up laser scans with the design model to show deviations, and runs floor flatness and levelness checks on scanned slabs with a PDF report.Office software that finds and models pipes, steelwork, ducts, walls, conduit and cable trays in a laser scan, so an as-built model is built faster in Revit or plant design tools, and compares the scan with the design model to show what was installed out of place.A plug-in for Autodesk Revit that lines up an as-built point cloud from a laser scan against the BIM model, measures where the built work departs from the design, and shows it as a coloured error map, against tolerances the user sets for each phase.A mobile app that shows the BIM model in place over the real site on a phone or tablet, so teams can check what has been built against the design, see services hidden in walls and ceilings, log issues against model objects and record progress.A quality platform that compares what has been built with the design model and flags deviations, covering concrete pours, the facade and interior rough-ins, with a field app for pour readiness and observations.WatchBuilt's team scans the site with its own LiDAR scanner on an agreed schedule, daily or weekly, and its platform compares the scans with the IFC model to track progress by trade, flag clashes and deviations from design, and produce as-built BIM models, reports and an audit trail.An AR hard hat that shows the design model overlaid on the real work, to set out and check installs against the model.
Who it's forContractors, surveyors and QA teams checking slabs, steel and finishes against design and floor tolerances.Scan to BIM modellers, surveyors, MEP and structural detailers, and contractors' QA and QC teams on building and industrial projects.General contractors checking subcontractors' MEP and structural work before payment or a concrete pour, BIM and VDC managers keeping as-built models current, and survey teams handing clients error maps.General contractors, subcontractors, engineers and owners using BIM on site.General contractors, project leaders and trade partners on building projects.BIM managers, site managers and owners on commercial, industrial and infrastructure projects.Owners, main contractors and specialist (M&E) contractors on data centres and other complex builds.
The catchBuilt around FARO hardware and scan formats, and no price is published.No price is published, and it works inside or alongside desktop design tools (Revit, Navisworks, Plant 3D, E3D), so it needs those and a registered scan.Runs only inside Revit; the point cloud must first be brought in, and the page names no file formats or accuracy figures.Prices were not read; it needs a BIM model to work, and placement accuracy figures are not given on the pages read.Sold by demo; the maker's page does not say how site data is captured.Scanning is a service done by WatchBuilt's team, not by the customer; the maker says accuracy suits progress tracking and deviation checks but is not survey-grade. Offered as pilots, scope agreed case by case.No price published; needs reflective targets on a fixed coordinate system set up on site; aimed at large mission-critical projects.
AssessmentReplaces the straightedge, the dipstick level and finding out the slab is out after the floor finish goes down. Laser screeds guided to a 3D surface, and scans checked against the model and the flatness spec. The win is the floor right first time, with the evidence. FARO BuildIT lines scans up with the model to show deviations and checks slab flatness. The catch: each works with its maker's machines or scanners, and none publish a price.Three uses, three benefits. For a renovation, it tells the designers what actually exists before they draw, and the builder the same before they start. For building management, it gives an as-built model of what's really in the walls and ceilings. During a build, it compares the scan with the design and shows what went in out of place. Office software from Topcon that finds pipes, steel, ducts, walls, conduit and cable trays in a laser scan and models them in Revit or plant design tools. The catch: it starts from a registered laser scan, so someone has to scan first, and it works inside desktop design tools you need to own already. No price published.Replaces the straightedge, the dipstick level and finding out the slab is out after the floor finish goes down. Laser screeds guided to a 3D surface, and scans checked against the model and the flatness spec. The win is the floor right first time, with the evidence. nCircle's Deviation nSpector maps a scan against the Revit model in colour to tolerances set per phase; Revit only, subscription after a trial. The catch: each works with its maker's machines or scanners, and none publish a price.Replaces the snag list on a clipboard and the tape measure against the drawing. Defects on the plan with a photo, and what is built checked against the model. GAMMA AR overlays the BIM model on the site on a phone or tablet to check what has been built; 30 day trial. The catch: the model checks need a good BIM model to start with, and most prices are not published.Replaces the straightedge, the dipstick level and finding out the slab is out after the floor finish goes down. Laser screeds guided to a 3D surface, and scans checked against the model and the flatness spec. The win is the floor right first time, with the evidence. SiteAware compares what's built with the model across pours, facade and rough-ins. The catch: each works with its maker's machines or scanners, and none publish a price.Replaces the snag list on a clipboard and the tape measure against the drawing. Defects on the plan with a photo, and what is built checked against the model. WatchBuilt's own team LiDAR scans the site on a schedule and compares it with the IFC model; demo and pilots. The catch: the model checks need a good BIM model to start with, and most prices are not published.Probably the future: live design information fed straight to the people installing it, showing exactly where things are supposed to run. For data centres, pharma and other complex systems, a big win. Probably overkill for a house type the plumber has first-fixed a hundred times, but as it improves and the cost comes down it will become viable across the industry. An AR hard hat that overlays the design model on the real work, for setting out and checking installs as you go. The catch: it needs reflective targets on a fixed coordinate system set up on site, it's aimed at large mission-critical jobs today, and no price is published.
Buying it
Sold in-To check-To check-To check-To check-To check-To checkUnited Kingdom, United States
Price shapeNot publishedNot publishedNot publishedNot publishedBy quoteNot publishedNot published
PriceNo price on the maker's page; free trial offered.No price published; subscription or maintenance licences sold through ClearEdge3D.No price published; a 30 day free trial by request, then a subscription.Prices are on a separate pricing page not read; a 30 day free trial is offered.Demo and quoteNo price published; the maker offers a demo and pilot projects.No price on the maker's page.
Released-To check-To checkJan 2026-To check-To check-To check-To check
MakerFARO TechnologiesClearEdge3D (a Topcon company) · United StatesnCircle TechGAMMA Technologies · LuxembourgSiteaware, Inc.WatchBuiltXYZ Reality