Deviation nSpector
A plug-in for Autodesk Revit that lines up an as-built point cloud from a laser scan against the BIM model, measures where the built work departs from the design, and shows it as a coloured error map, against tolerances the user sets for each phase.
- Review no.
- RS-R1926
- Revision
- C
- Read at source
- 15 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the straightedge, the dipstick level and finding out the slab is out after the floor finish goes down. Laser screeds guided to a 3D surface, and scans checked against the model and the flatness spec. The win is the floor right first time, with the evidence. nCircle's Deviation nSpector maps a scan against the Revit model in colour to tolerances set per phase; Revit only, subscription after a trial. The catch: each works with its maker's machines or scanners, and none publish a price.
The catch
Runs only inside Revit; the point cloud must first be brought in, and the page names no file formats or accuracy figures.
What it replaces
Checking scans against the model by eye, element by element, in Revit or a separate point cloud tool.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Deviation nSpector? Tell us how it went
Source and revisions
Source: Automate Construction Quality Control with Deviation nSpector, nCircle Tech
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/deviation-nspector"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>