Skip to content
REDSTICK⌕
SaaSRoofingCladding and façadesCladding and rainscreen design and specification to a manufacturer's system

Swisspearl Smart Facade Tool

An Archicad add-on that places Swisspearl facade boards between set joint lines, leaving openings clear, in the building model and exports a cutting file for pricing and production.

Review no.
RS-R419
Revision
C
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the subframe specification worked out from the maker's manual. Makers' tools that lay out the boards or specify the brackets and rails, with thermal figures. Swisspearl's tool places its boards in the Archicad model and exports a cutting file; substructure not covered. The catch: each covers its own maker's system only.

The catch

Archicad only and Swisspearl boards only; substructure and fixings are not covered.

Who forArchitects modelling Swisspearl fibre cement rainscreen in Archicad.
By whomSwisspearlswisspearl.com ↗
Releasedto check
Sold innot stated by the maker
PriceNot publishedNo price is stated in the maker's manual.

What it replaces

Drawing board layouts by hand and scheduling each board's size for the cutter.

Who else does it

Compare all 4 for cladding and rainscreen design and specification to a manufacturer's system side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Swisspearl Smart Facade Tool? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Smart Facade Tool help, version 1-2025, Swisspearl (maker)

RevDateChange
C11 Nov 2026Re-read at source (hunt run 2026-11-11l): Where it is sold: read at the maker's own site.
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09s).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/swisspearl-smart-facade-tool"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>