Skip to content
REDSTICK⌕
SaaSRoofingCladding and façadesCladding and rainscreen design and specification to a manufacturer's system

Lindab building products software (Sandwich Panel Selector, StructuralDesigner, WALLanalyzer, DIMstud)

A set of Lindab tools for its steel building products: a sandwich panel selector, Eurocode design of profiled sheets, purlins and wall studs, wall U-value and moisture checks, a wall build up finder, and Revit and AutoCAD libraries.

Review no.
RS-R404
Revision
C
Read at source
10 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the subframe specification worked out from the maker's manual. Makers' tools that lay out the boards or specify the brackets and rails, with thermal figures. Lindab's tools select sandwich panels and design profiled sheets, purlins and studs to Eurocode, several tied to Swedish requirements. The catch: each covers its own maker's system only.

The catch

Lindab products only; several tools are tied to Swedish or selected European requirements.

Who forEngineers, architects and cladding contractors specifying Lindab profiled sheet, sandwich panel and steel stud walls.
By whomLindablindab.com ↗
Releasedto check
Sold innot stated by the maker
PriceNot publishedNo price is stated on the maker's page.

What it replaces

Load span tables and hand U-value calculations from product literature.

Who else does it

Compare all 4 for cladding and rainscreen design and specification to a manufacturer's system side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Lindab building products software (Sandwich Panel Selector, StructuralDesigner, WALLanalyzer, DIMstud)? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: All software for building products, Lindab (maker)

RevDateChange
C10 Nov 2026Re-read at source (hunt run 2026-11-11q): Where it is sold: read at the maker's own site.
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09s).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/lindab-building-products-software"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>