Skip to content
REDSTICK⌕

Compare · job: cladding and rainscreen design and specification to a manufacturer's system · stage: design and approvals

Cladding and rainscreen design and specification to a manufacturer's system, side by side

Every tool on the record for cladding and rainscreen design and specification to a manufacturer's system: 4 software tools, from Lindab building products software (Sandwich Panel Selector, StructuralDesigner, WALLanalyzer, DIMstud), SFS ConnectSuite (NVELOPE Project Builder, Thermal Builder, DesignRx), Sto Aesthetic+Product Selector and Swisspearl Smart Facade Tool, in alphabetical order. 1 has a free plan. On the record so far, 1 is on sale in the UK and between them they are sold in 2 countries. 4 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 11 November 2026.

ComparingAll 4 toolsChoose which
Show
Scroll right for the rest
At a glance
What it doesA set of Lindab tools for its steel building products: a sandwich panel selector, Eurocode design of profiled sheets, purlins and wall studs, wall U-value and moisture checks, a wall build up finder, and Revit and AutoCAD libraries.Online tools for specifying SFS's NVELOPE rainscreen subframe brackets and rails: a project builder for the specification, thermal figures (insulation depth, Chi values), and in North America structural spacing, a budget calculator and a fastener colour matcher.A web tool from Sto Corp. You choose a facade look, a material or application process, or a texture; it shows the Sto finishes that give that look and the Sto wall systems (EIFS, stucco, panel and rainscreen systems) that can carry them.An Archicad add-on that places Swisspearl facade boards between set joint lines, leaving openings clear, in the building model and exports a cutting file for pricing and production.
Who it's forEngineers, architects and cladding contractors specifying Lindab profiled sheet, sandwich panel and steel stud walls.Architects, specifiers and facade engineers designing rainscreen cladding on an NVELOPE subframe.Architects and specifiers choosing a rendered or coated facade system from Sto's US range.Architects modelling Swisspearl fibre cement rainscreen in Archicad.
The catchLindab products only; several tools are tied to Swedish or selected European requirements.Covers SFS's NVELOPE systems only. Needs an SFS login; the tools differ between the UK and North American sites.It covers Sto Corp.'s own US range only; the page does not say it gives specification text, details or quantities.Archicad only and Swisspearl boards only; substructure and fixings are not covered.
AssessmentReplaces the subframe specification worked out from the maker's manual. Makers' tools that lay out the boards or specify the brackets and rails, with thermal figures. Lindab's tools select sandwich panels and design profiled sheets, purlins and studs to Eurocode, several tied to Swedish requirements. The catch: each covers its own maker's system only.Replaces the subframe specification worked out from the maker's manual. Makers' tools that lay out the boards or specify the brackets and rails, with thermal figures. SFS ConnectSuite specifies NVELOPE rainscreen subframes with insulation depth and Chi values; free. The catch: each covers its own maker's system only.Replaces the manufacturer's tech line and the engineer's spreadsheet. Calculators for sound, glass, fixings and finishes, most from the maker of the product. Sto's selector shows which of its US finishes give a chosen look; no specification text. The catch: most only cover their maker's own products, and the results are predictions to check.Replaces the subframe specification worked out from the maker's manual. Makers' tools that lay out the boards or specify the brackets and rails, with thermal figures. Swisspearl's tool places its boards in the Archicad model and exports a cutting file; substructure not covered. The catch: each covers its own maker's system only.
Buying it
Sold in-To checkUnited KingdomUnited States-To check
Price shapeNot publishedFreeNot publishedNot published
PriceNo price is stated on the maker's page.The maker says it provides this service free for its NVELOPE systems.No price on the page.No price is stated in the maker's manual.
MakerLindabSFS GroupSto Corp. · United StatesSwisspearl

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.