Skip to content
REDSTICK⌕
SaaSFire protectionSprinkler and fire suppression system design and hydraulic calculation

Stabicad for Revit Sprinkler

A sprinkler module for Revit: model the installation from the alarm valve to the heads, place heads in bulk, draw flexible pipe and use manufacturer families. It calculates the drawn system to EN 12845 or NFPA 13 for the most or least favourable area, shows the result in the model and writes a report.

Review no.
RS-R752
Revision
C
Read at source
16 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the hydraulic calc done by hand or in a spreadsheet, and drawing the system twice. Software that lays out sprinklers, risers and gas systems and proves the pipework against the water supply. Stabicad for Revit Sprinkler models from alarm valve to heads and calculates to EN 12845 or NFPA 13 in the model. The catch: check the standard it calculates to (EN 12845, NFPA 13, the Australian ones) before you trust the result, and the manufacturers' free tools work best with their own heads.

The catch

Revit only. Price not shown; sold with a service and maintenance contract.

Who forSprinkler designers and MEP contractors drawing in Revit.
By whomStabiplan
Netherlands
stabiplan.com ↗
Releasedto check
Sold in
Europe
  • Belgium: on sale
  • France: on sale
  • Ireland: on sale
  • Luxembourg: on sale
  • Netherlands: on sale
  • United Kingdom: on sale
PriceNot publishedNot published; the maker sells it with a service and maintenance contract.

What it replaces

Calculating a Revit sprinkler model in a separate hydraulic program.

Who else does it

Compare all 10 for sprinkler and fire suppression system design and hydraulic calculation side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Stabicad for Revit Sprinkler? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Stabicad Sprinkler

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12s): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/stabicad-for-revit-sprinkler"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>