Wirtgen AutoPilot 2.0 with Field Rover
A GNSS machine control system and tablet software for Wirtgen slipform pavers: the line is imported as a 3D model or measured on site with a survey pole, checked and smoothed on the tablet, and the paver then steers and sets slope along it with no string line.
- Review no.
- RS-R1697
- Revision
- C
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the string line, the dipping rod in the mat and the job record written up from the foreman's notes. The paver steered to the model, the layer measured as it goes down, and the milling and rolling logged as they are done. Wirtgen AutoPilot 2.0 steers SP 15 and SP 25 slipform pavers to a 3D line with no string line, the line imported or measured on site with a pole; needs a reference station and a total station for height. The catch: most are built around the maker's own machines, and none publishes a price apart from one free app.
The catch
SP 15 and SP 25 series pavers only; needs a GNSS reference station, a total station for height and good satellite reception; no price published.
What it replaces
Setting out and maintaining string lines for slipform paving.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Wirtgen AutoPilot 2.0 with Field Rover? Tell us how it went
Source and revisions
Source: Wirtgen AutoPilot 2.0: Higher paving accuracy with lower costs
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/wirtgen-autopilot-20-with-field-rover"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>