Skip to content
REDSTICK⌕
SaaSRoads and pavingPlant and equipmentPaving machine control and mat quality

SSI IntelliCut

Takes a road's measured profile and works out where to diamond grind or cold plane so it passes its IRI and MRI limits at the least grinding, shows before and after roughness, and sends the grind start and end points to a GPS tool on the grinder.

Review no.
RS-R1662
Revision
B
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the string line, the dipping rod in the mat and the job record written up from the foreman's notes. The paver steered to the model, the layer measured as it goes down, and the milling and rolling logged as they are done. SSI IntelliCut works out where to grind or plane to pass IRI and MRI limits at the least grinding and sends the start and end points to the grinder's GPS. The catch: most are built around the maker's own machines, and none publishes a price apart from one free app.

The catch

Reads SSI and PPF profile data; GPS navigation on the grinder needs SSI's CS7900 tool and an optional subscription, and no price is published.

Who forPaving, grinding and milling contractors and road agencies checking new or existing pavement against ride quality specifications.
By whomSurface Systems & Instruments (SSI)
United States
smoothroad.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedLicensed software; no price published. GPS on the grinder is an optional subscription.

What it replaces

Trial and error grind planning by hand or in ProVAL, and marking grind locations on the road by chainage.

Who else does it

Compare all 8 for paving machine control and mat quality side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with SSI IntelliCut? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: SSI Software

RevDateChange
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/ssi-intellicut"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>