Skip to content
REDSTICK⌕
SaaSFlooring and screedsPlumbing and heatingUnderfloor heating layout and design

Win_HT pro

Sizes underfloor heating and radiators for any laying type and floor build-up using suppliers' system data, balances the circuits hydraulically at the manifold, and carries the heat load and U-value calculations of Win_HT.

Review no.
RS-R1775
Revision
C
Read at source
14 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the heat loss spreadsheet, the radiator schedule worked out by hand and the loop layout drawn freehand. Design software for the services engineer and the installer: heat loss, emitter and pipe sizing, ventilation and the building physics behind them, drawn and calculated in one place. Win_HT pro sizes underfloor heating and radiators from suppliers' system data and balances them at the manifold, on Win_HT's calculations; Swiss standards. The catch: each is written to one country's standards, and the ones from a boiler or heat pump maker plan only that maker's kit.

The catch

Swiss standards only; no published prices.

Who forHeating installers and planners in Switzerland.
By whomAAA EDV Vertriebs AG
Switzerland
aaaedv.ch ↗
Releasednot stated by the maker
Sold in
Europe
  • Switzerland: on sale
PriceBy quoteNo prices published; quote on request from support.

What it replaces

Manufacturer tables and hand sizing of heating circuits.

Who else does it

Compare all 9 for underfloor heating layout and design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Win_HT pro? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Win_HT pro, AAA EDV

Availability read at: Switzerland

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A14 Nov 2026First read at source (hunt run 2026-11-14r).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/win-ht-pro"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>