Skip to content
REDSTICK⌕
SaaSFlooring and screedsPlumbing and heatingUnderfloor heating layout and design

Uponor UFH Revit plug-in

A Revit add-in that lays out Uponor underfloor heating, calculates it to EN 1264, generates the pipe loops automatically and lists the materials.

Review no.
RS-R536
Revision
D
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working quantities, fixings and build-ups out from the data sheet, or ringing the technical line. Free or low-cost tools from the product makers: pick the product, enter the job, get the quantity, the build-up or the drawing. Handy at the counter and at tender. Uponor's Revit plug-in lays out and calculates underfloor heating to EN 1264. The catch: each covers its own maker's products only, and the makers call the results estimates or guides; check it before you order or build to it.

The catch

Uponor products only, and it needs Revit.

Who forMEP designers and engineers who model heating in Revit and specify Uponor systems.
By whomUponorbim.uponor.com ↗
Releasednot stated by the maker
Sold in
Europe
  • Austria: on sale
PriceNot publishedDownload offered; the page does not say whether it is free.

What it replaces

Drawing underfloor heating loops by hand in Revit and counting materials separately.

Who else does it

Compare all 9 for underfloor heating layout and design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Uponor UFH Revit plug-in? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Uponor: UFH plugin for Revit

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C11 Nov 2026Re-read at source (hunt run 2026-11-11u): Where it is sold: read at the maker's own site.
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09v).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/uponor-ufh-revit-plug-in"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>