Trimble FieldLink
Tablet software that sets out points from 3D models or drawn lines with a robotic total station or GNSS receiver, collects as-built points and produces a point cloud registered to the design model.
- Review no.
- RS-R2268
- Revision
- B
- Read at source
- 16 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Trimble's layout software sets out from 3D models with a robotic total station, GNSS or scanner and records as-builts, on a subscription through dealers.
This kind of tool · Setting out
Replaces pegs, string lines and the engineer with a total station on every point. RTK receivers and robots that set out points and lines from the drawing. The win is fewer setting-out errors and the engineer freed up.
The catch: wrong design data or a poor GNSS fix puts the point in the wrong place, so check it before you dig.
The same note is on all 19 tools of this kind.
The catch
Needs Trimble survey hardware, licences come through dealers, and no price is published.
- Japan: through a distributor
What it replaces
Tape and string layout from paper drawings and separate as-built surveys.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Trimble FieldLink? Tell us how it went
Source and revisions
Source: Trimble FieldLink software
Availability read at: Japan
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/trimble-fieldlink"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>