GyroEye Insert (ジャイロアイ インサート)
A mixed reality app that shows grid lines, pipe routes and insert points from Rebro at full size on site, so installers can mark anchor and sleeve positions and track which points are done.
- Review no.
- RS-R2257
- Revision
- B
- Read at source
- 16 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Informatix's mixed reality app marks out services inserts and sleeves from Rebro drawings through a headset, with no tape or paper.
This kind of tool · Setting out
Replaces pegs, string lines and the engineer with a total station on every point. RTK receivers and robots that set out points and lines from the drawing. The win is fewer setting-out errors and the engineer freed up.
The catch: wrong design data or a poor GNSS fix puts the point in the wrong place, so check it before you dig.
The same note is on all 19 tools of this kind.
The catch
Only Rebro exports directly, it needs a HoloLens 2, XR10 or Magic Leap 2 headset, and prices are published only as an image.
What it replaces
Marking insert positions with tapes, paper drawings or a total station.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with GyroEye Insert (ジャイロアイ インサート)? Tell us how it went
Source and revisions
Source: GyroEye Insert
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/gyroeye-insert"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>