TinySurveyor Terra
Autonomous robot that marks stakeout points and lines on open ground with spray paint from a digital layout.
- Review no.
- RS-R018
- Revision
- C
- Read at source
- 7 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces pegs, string lines and the engineer with a total station on every point. RTK receivers and robots that set out points and lines from the drawing. The win is fewer setting-out errors and the engineer freed up. TinySurveyor Terra paints stakeout points and lines on open ground, using your own GNSS receiver. The catch: only as good as the design data and the GNSS fix; check it before you dig.
The catch
Needs the contractor's own GNSS receiver (and a total station for heights); marks paint, not pegs.
- United States: through a distributor
What it replaces
A chainman and surveyor walking points out with a GNSS pole and marking each by hand.
What it does, and the maker's figures
- Prints lines from the drawings
- ✓ Yes
- Prints points
- ✓ Yes
- Reads the CAD file directly
- ✓ Yes
- Accuracy
- 10-20 mmMaker’s figure
- Finds its position by
- contractor's GNSS receiver; total station for heightMaker’s figure
- Speed
- up to 4 km/hMaker’s figure
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with TinySurveyor Terra? Tell us how it went
Source and revisions
Source: The TinySurveyor Terra: a Robotic Land Surveyor (Monsen Engineering)
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/tinysurveyor-terra"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>