Skip to content
REDSTICK⌕
SaaSSurveying and setting outSetting out points on open ground

Cube-a

Android field app for land surveying with Stonex GNSS receivers and total stations: survey, stakeout of points, lines and road alignments, GIS data capture with attributes, live surface models and volumes, point cloud and mesh viewing, and CAD drawing in the field. Modules are switched on as needed.

Review no.
RS-R1646
Revision
C
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces pegs, string lines and the engineer with a total station on every point. RTK receivers and robots that set out points and lines from the drawing. The win is fewer setting-out errors and the engineer freed up. STONEX's Cube-a is an Android survey and stakeout app with GIS capture and live volumes; total stations must be Stonex, other receivers by NMEA only. The catch: only as good as the design data and the GNSS fix; check it before you dig.

The catch

Total stations must be Stonex; other makers' GNSS receivers connect by generic NMEA in rover mode only. Price only on request.

Who forSurveyors, setting-out engineers and GIS crews using Stonex instruments.
By whomSTONEX srl
Italy
stonex.it ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceBy quotePrice on request from STONEX.

What it replaces

A separate data collector program for each instrument, and taking field files back to the office by hand.

Who else does it

Compare all 12 for setting out points on open ground side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Cube-a? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Cube-a Software (STONEX)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/cube-a"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>