Skip to content
REDSTICK⌕
AI toolConcreteReinforcementCounting and checking rebar before the pour

SiteRebar AI rebar inspection terminal

A rugged tablet with a stereo camera that is pointed at fixed reinforcement. AI picks out each bar, counts them, measures the spacing and judges the bar size, and the results feed straight into the inspection forms back in the office.

Review no.
RS-R859
Revision
C
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the engineer with a tape on the deck before the pour, and counting bars in a bundle by hand. Point a tablet or a phone at the steel: it counts the bars and measures spacing and cover. KENTEM's SiteRebar counts and measures with a stereo camera; Japan only. The catch: early, two of the four are built for Japan, and none give accuracy figures you can plan on.

The catch

For use in Japan only, by the maker's own statement. Lower layers hidden behind upper bars cannot be measured, small bars shot at an angle can be missed, and the camera needs a clean AR marker in shot. No price published.

Who forJapanese contractors and site supervisors carrying out rebar arrangement inspection before concreting.
By whomKENTEM (Kensetsu System Co., Ltd.)
Japan
kentem.jp ↗
Releasedto check
Sold in
Asia-Pacific
  • Japan: on sale
PriceNot publishedNo price published.

What it replaces

Measuring bars by tape with an inspection blackboard in each photo, and writing up the forms by hand.

Who else does it

Compare all 5 for counting and checking rebar before the pour side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with SiteRebar AI rebar inspection terminal? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: SiteRebar operation manual, KENTEM

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12b): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A10 Nov 2026First read at source (hunt run 2026-11-10r).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/siterebar-ai-rebar-inspection-terminal"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>