Skip to content
REDSTICK⌕

Compare · job: counting and checking rebar before the pour · stage: frame and structure

Counting and checking rebar before the pour, side by side

Every tool on the record for counting and checking rebar before the pour: 5 AI tools, from AIJO HaiKing (AIJO 配筋王), Fieldproxy Rebar Placement Verifier, GeoMation rebar as-built automatic measurement system and SiteRebar AI rebar inspection terminal onwards, in alphabetical order. On the record so far, none is shown on sale in the UK and between them they are sold in 2 countries. 3 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 16 November 2026.

ComparingAll 5 toolsChoose which
Show
Scroll right for the rest
Fact
RS-R2197 · AI tool · COMSYS Information System (コムシス情報システム)AIJO HaiKing (AIJO 配筋王)
RS-R837 · AI tool · FieldproxyFieldproxy Rebar Placement Verifier
RS-R838 · AI tool · Hitachi SolutionsGeoMation rebar as-built automatic measurement system
RS-R859 · AI tool · KENTEM (Kensetsu System Co., Ltd.)SiteRebar AI rebar inspection terminal
RS-R2036 · AI tool · Pixie Dust Technologies, Inc. (ピクシーダストテクノロジーズ)TOTTARROW
At a glance
What it doesAn AI rebar inspection tool: the rebar is photographed with a tablet's camera and the AI measures bar spacing, count, diameter and concrete cover, which the inspector checks and corrects; results go into the inspection ledger, with the electronic site board data on a separate layer from the untouched photo.An AI agent inside Fieldproxy's field service software. Site staff photograph the fixed reinforcement in a grid; the agent compares the photos with the drawings for bar spacing, cover and ties, lists any faults with their location, and fills in the pre-pour form for a person to approve.An Android tablet with a commercial depth camera is pointed at the fixed reinforcement and counts the bars and measures their spacing, cover and lap lengths. Results and photos go to the cloud, where inspection reports are produced in the Japanese ministry's formats.A rugged tablet with a stereo camera that is pointed at fixed reinforcement. AI picks out each bar, counts them, measures the spacing and judges the bar size, and the results feed straight into the inspection forms back in the office.A service that takes a 360 degree video of the rebar, lines it up with the BIM model, measures and pulls stills from it, and returns an inspection photo ledger, part AI and part checked by the maker's staff.
Who it's forContractors and inspectors on Japanese public works who must record rebar as-built checks before the pour.Contractors who want a recorded pre-pour rebar check without a dedicated scanner.Japanese civil and bridge contractors carrying out rebar as-built inspection before concreting.Japanese contractors and site supervisors carrying out rebar arrangement inspection before concreting.Main contractors doing rebar and as-built inspections
The catchBuilt around Japan's MLIT inspection rules and the J-COMSIA photo standard; price is by enquiry.Part of Fieldproxy's wider field service platform, not a standalone rebar tool. The page gives no accuracy figures and no detail on how cover is judged from photos. Every plan is by quote, with a set-up fee and no free trial.Built around Japanese public works rules and forms; the maker says it does not meet the electronic delivery guidelines. Cover needs the bar diameter entered by hand. Sold through partners on subscription, no published price.For use in Japan only, by the maker's own statement. Lower layers hidden behind upper bars cannot be measured, small bars shot at an angle can be missed, and the camera needs a clean AR marker in shot. No price published.Needs a BIM model and a 360 degree camera; part of the work is done by the maker's staff, not the AI; price not published
Assessment-To checkReplaces the engineer with a tape on the deck before the pour, and counting bars in a bundle by hand. Point a tablet or a phone at the steel: it counts the bars and measures spacing and cover. Fieldproxy's verifier compares photos of the fixed steel with the drawings and fills in the pre-pour form for approval; inside its field service platform. The catch: early, two of the four are built for Japan, and none give accuracy figures you can plan on.Replaces the engineer with a tape on the deck before the pour, and counting bars in a bundle by hand. Point a tablet or a phone at the steel: it counts the bars and measures spacing and cover. Hitachi's GeoMation measures count, spacing, cover and laps with a depth camera, to Japanese ministry forms. The catch: early, two of the four are built for Japan, and none give accuracy figures you can plan on.Replaces the engineer with a tape on the deck before the pour, and counting bars in a bundle by hand. Point a tablet or a phone at the steel: it counts the bars and measures spacing and cover. KENTEM's SiteRebar counts and measures with a stereo camera; Japan only. The catch: early, two of the four are built for Japan, and none give accuracy figures you can plan on.-To check
Buying it
Sold in-To checkUnited StatesJapanJapan-To check
Price shapeBy quoteBy quoteSubscriptionNot publishedNot published
PriceBy enquiry to the maker.All plans by quote, with a one-off set-up fee; demo and scoped pilot.Subscription through Hitachi Solutions partners; no price published.No price published.Not published; a trial plan is offered.
Released-To check-To checkDec 2021-To checkJul 2025
MakerCOMSYS Information System (コムシス情報システム) · JapanFieldproxyHitachi Solutions · JapanKENTEM (Kensetsu System Co., Ltd.) · JapanPixie Dust Technologies, Inc. (ピクシーダストテクノロジーズ) · Japan

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.