sitechTMScreator
Plans a horizontal directional drilling bore in 3D around buried services and protection zones taken from Trimble Siteworks, writes it as a TMS file for Subsite TMS Plus on Ditch Witch rigs, and lets the crew check the drill head against the model with a GNSS rover while drilling.
- Review no.
- RS-R1658
- Revision
- B
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the bore plotted on graph paper and the locator's readings written on the back of a hand. Planning a directional bore around what is in the ground, following it rod by rod, and printing the as-built. SITECH's TMS creator plans the bore in 3D around services from Trimble Siteworks for Ditch Witch rigs; Germany only, in a Siteworks bundle. The catch: most work with one maker's rig or locator, and the as-built is only as good as the readings taken.
The catch
Sold in Germany only, through SITECH Deutschland, and only as part of a Trimble Siteworks bundle.
- Germany: on sale
What it replaces
Planning bore paths on paper and keying them into the rig by hand, and redrawing as built bore records.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with sitechTMScreator? Tell us how it went
Source and revisions
Source: Umsetzungssoftware Horizontalbohrungen, SITECH Deutschland
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/sitechtmscreator"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>