Skip to content
REDSTICK⌕
SaaSDrainage and utilitiesPlanning and guiding horizontal directional drilling bores

QuickPlanner3D

Bore planning for horizontal directional drilling. Enter the start and end points, ground levels, obstacles and the bend limits of rods and pipe, and it works out a feasible bore path, shown as a table, plan, cross section and 3D view, saved to edit later.

Review no.
RS-R1679
Revision
B
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the bore plotted on graph paper and the locator's readings written on the back of a hand. Planning a directional bore around what is in the ground, following it rod by rod, and printing the as-built. TRACTO's QuickPlanner3D works out a feasible bore path from levels, obstacles and bend limits; plans only, 656 euros a year. The catch: most work with one maker's rig or locator, and the as-built is only as good as the readings taken.

The catch

Plans the bore only, it does not guide the rig; needs an internet connection; no file formats or links to other systems named.

Who forHDD contractors and planners pricing and planning utility bores, with rigs of any make.
By whomTRACTO-TECHNIK
Germany
tracto.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceSubscription656 euros a year after a 4 week free trial.

What it replaces

Working out bore profiles by hand or in a spreadsheet.

Who else does it

Compare all 3 for planning and guiding horizontal directional drilling bores side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with QuickPlanner3D? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: QuickPlanner3D, TRACTO

RevDateChange
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13b).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/quickplanner3d"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>