Robot Plotter
Autonomous robot that paints setting-out lines and points on asphalt and site ground from a digital drawing.
- Review no.
- RS-R017
- Revision
- C
- Read at source
- 11 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces pegs, string lines and the engineer with a total station on every point. RTK receivers and robots that set out points and lines from the drawing. The win is fewer setting-out errors and the engineer freed up. Tyker's Robot Plotter paints setting-out on asphalt, built mainly for road pre-marking. The catch: only as good as the design data and the GNSS fix; check it before you dig.
The catch
Built mainly for road pre-marking on even surfaces; no published accuracy figure.
- Australia: through a distributor
What it replaces
A three- or four-person crew marking out with string lines, tapes and spray cans.
What it does, and the maker's figures
- Prints lines from the drawings
- ✓ Yes
- Finds its position by
- RTK-GNSS or total stationMaker’s figure
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Robot Plotter? Tell us how it went
Source and revisions
Source: Tyker's Robot Plotter for Autonomous Ground Marking (Inside GNSS)
Availability read at: Australia
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/robot-plotter"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>