Skip to content
REDSTICK⌕
SaaSTimber frame and carpentryTruss and timber component design

Pryda Build

Design software used by Pryda's frame and truss fabricators to design roof trusses and wall frames, optimise timber use, and run production through a Production Manager module.

Review no.
RS-R371
Revision
C
Read at source
9 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the truss designer's hand calculations and drawings, and the cutting list worked out from them. The connector plate makers give their fabricators software that models the whole roof and floor, designs each truss and runs it through to production. The win is speed and timber saved. Pryda Build designs trusses and wall frames, optimises timber and runs production, for Pryda fabricators only. The catch: none publish a price, and each ties you to its maker's connectors and hangers.

The catch

For Pryda fabricators only, set up through a supervisor; needs a Pryda Build licence; platform and price not published.

Who forFrame and truss fabricators that use Pryda connectors, and their designers.
By whomPryda
Australia
pryda.com.au ↗
Releasednot stated by the maker
Sold into check
PriceNot publishedA Pryda Build licence is required; no price published.

What it replaces

Hand truss design and separate cost comparisons of web layouts.

Who else does it

Compare all 14 for truss and timber component design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Pryda Build? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Timber framing design optimisation in Pryda Software, Pryda (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09r).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/pryda-build"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>