Skip to content
REDSTICK⌕
SaaSTimber frame and carpentryTruss and timber component design

FEM-Design CLT module

A structural module that checks and sizes cross-laminated timber wall and floor panels to Eurocode 5, including joint forces and buckling.

Review no.
RS-R296
Revision
C
Read at source
8 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces span tables and the engineer's hand calculation for a joist, beam or stud. Mostly free tools from timber makers and industry bodies, built around one country's code. The win is a quick, checkable size for a member. The FEM-Design CLT module checks cross-laminated timber walls and floors to Eurocode 5, on top of FEM-Design and its Timber Design module; by quote. The catch: each is tied to one country's code, and the makers' tools to their own products. A sizing tool is for a competent designer; it doesn't replace the engineer on anything beyond the simple.

The catch

Needs FEM-Design and its Timber Design module as well; price by quotation only.

Who forStructural engineers designing CLT and timber buildings to Eurocodes.
By whomStruSoft AB
Sweden
strusoft.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceBy quotePrice by quotation; free trial of about two weeks; free student versions on application.

What it replaces

Hand or spreadsheet checks of CLT panels from manufacturers' tables.

Who else does it

Compare all 14 for truss and timber component design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FEM-Design CLT module? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: FEM-Design Cross Laminated Timber module (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A8 Nov 2026First read at source (hunt run 2026-11-08x).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/fem-design-clt-module"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>