PRE-Stress
Software for designing prestressed concrete elements to Eurocode: beams (predefined or custom sections, sloped beams), hollow core slabs, double tees and sloped double tees. Sets strands and bars through a pattern manager, applies self-weight, topping and eccentric slab loads with National Annex load combinations, checks torsion, and runs fire design with a temperature plot across the section. Produces reports of internal forces over the element's life.
- Review no.
- RS-R889
- Revision
- C
- Read at source
- 10 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the precast designer's hand calcs and the detailer drawing every unit, every lifting point and every bar. Software that designs the element to code and draws it for the factory. StruSoft's PRE-Stress designs prestressed beams, hollow core and double tees to Eurocode with five National Annexes, the UK's among them, fire design included. The catch: each is written to one country's codes, US or Eurocode, and the factory links need the maker's wider suite.
The catch
Eurocode only, with five National Annexes (including the UK's).
What it replaces
Hand calculations and spreadsheets for prestressed element design.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with PRE-Stress? Tell us how it went
Source and revisions
Source: Prestressed Concrete Beam Design, PRE-Stress, StruSoft
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/pre-stress"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>