ELiSLAB
Stand-alone software for calculating reinforcement in hollow core and solid precast slabs: loads (area, line, trapezoidal, point), stresses, strands, topping cracking, bending, shear and deflection. Optimises strand layouts to Eurocode, the National Annex and the factory's own rules, and recalculates around openings. Quick reports give a traffic-light pass status; long reports chart load and opening effects along the slab. Links to Elematic's ELiPLAN ERP and FloorMES, and to Tekla.
- Review no.
- RS-R872
- Revision
- C
- Read at source
- 16 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the precast designer's hand calcs and the detailer drawing every unit, every lifting point and every bar. Software that designs the element to code and draws it for the factory. Elematic's ELiSLAB calculates strands in hollow core and solid slabs to Eurocode and the factory's own rules, round openings too; links to Elematic's plant software. The catch: each is written to one country's codes, US or Eurocode, and the factory links need the maker's wider suite.
The catch
Floating licence serves one designer at a time unless extra seats are bought; Eurocode updates are an add-on.
What it replaces
Spreadsheet or hand design of hollow core slabs and strand patterns.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with ELiSLAB? Tell us how it went
Source and revisions
Source: ELiSLAB, Elematic
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/elislab"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>