Skip to content
REDSTICK⌕
SaaSCladding and façadesWindows, doors and glazingGlass and panel cutting optimisation and fabrication

Perfect Cut

Software that nests glass pieces onto stock sheets to minimise scrap and cutting time, manages offcuts and stock, and sends the cutting plans to the cutting table.

Review no.
RS-R407
Revision
C
Read at source
9 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces cutting lists worked out by hand, offcuts stacked against the wall and forgotten, and orders re-keyed into the factory. Software that nests the pieces onto stock sheets, uses the offcuts, schedules the toughening and IGU lines and, at the top end, drives the cutting and sorting lines itself. The win is less scrap and every sheet traced. Perfect Cut nests glass onto stock sheets, manages offcuts and sends plans to the cutting table; licensed by a USB key. The catch: factory software, mostly sold by demo with no published price, and the bigger systems need the automated lines to control.

The catch

Licensed by USB hardware key; no price or trial shown, contact only.

Who forGlass processors and glaziers cutting float, laminated, low-E and insulating glass.
By whomOptima SRL (R.O. Operations Research)
Italy
perfectcut.glass ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedNo price published.

What it replaces

Manual or basic nesting of glass cuts and stock tracking on paper.

Who else does it

Compare all 7 for glass and panel cutting optimisation and fabrication side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Perfect Cut? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Perfect Cut, R.O. Operations Research (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09s).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/perfect-cut"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>