Skip to content
REDSTICK⌕
SaaSCladding and façadesWindows, doors and glazingGlass and panel cutting optimisation and fabrication

FeneVision

ERP that runs a glass fabrication or window and door plant: quoting and configuration, dealer ordering, production scheduling, glass and lineal cutting optimisation, barcode tracking, machine links and shipping.

Review no.
RS-R432
Revision
C
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces cutting lists worked out by hand, offcuts stacked against the wall and forgotten, and orders re-keyed into the factory. Software that nests the pieces onto stock sheets, uses the offcuts, schedules the toughening and IGU lines and, at the top end, drives the cutting and sorting lines itself. The win is less scrap and every sheet traced. FeneVision (Cyncly) is ERP for a glass or window and door plant, quoting through cutting optimisation, machine links and shipping. The catch: factory software, mostly sold by demo with no published price, and the bigger systems need the automated lines to control.

The catch

Price is not published; it is sold by demo.

Who forGlass fabricators and window and door manufacturers.
By whomCynclycyncly.com ↗
Releasedto check
Sold innot stated by the maker
PriceBy quoteNot published; demo on request.

What it replaces

Spreadsheet quoting, manual scheduling and separate cutting and shipping systems.

Who else does it

Compare all 7 for glass and panel cutting optimisation and fabrication side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FeneVision? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: FeneVision: Master your windows, doors and glass production, Cyncly

RevDateChange
C11 Nov 2026Re-read at source (hunt run 2026-11-11j): Where it is sold: read at the maker's own site.
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09t).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/fenevision"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>