Skip to content
REDSTICK⌕
SaaSElectricalFire protectionFire alarm and detection system design

FireCAD

Lays out fire alarm devices on DWG or imported PDF plans, shows detector coverage as devices are placed, draws wire paths and risers, and writes battery and circuit calculation reports from a parts database.

Review no.
RS-R727
Revision
C
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working the loop load, the voltage drop and the battery size by hand, and placing detectors to the spacing rules by eye. Mostly free tools from the panel and detector makers, plus a few independent layout tools. FireCAD lays out devices on DWG or PDF plans with coverage shown, and writes the battery and circuit calcs; by quote. The catch: the makers' tools cover their own kit only, so they help once the manufacturer is chosen, not before.

The catch

Subscription price is not published; sales quote it.

Who forFire alarm designers, security designers and installers.
By whomCadGen Software LLC (powered by Inspect Point)
United States
getfirecad.inspectpoint.com ↗
Releasedto check
Sold in
North America
  • United States: on sale
PriceSubscriptionSubscription; prices not published, quoted by sales.

What it replaces

Drawing fire alarm layouts by hand in general CAD and doing battery and circuit calculations separately.

Who else does it

Compare all 8 for fire alarm and detection system design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FireCAD? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Welcome to FireCAD, powered by Inspect Point

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12s): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/firecad"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>