Skip to content
REDSTICK⌕
SaaSElectricalFire protectionFire alarm and detection system design

ASPIRE pipe network design software

Designs the sampling pipe network for an aspirating smoke detector: pipe runs, branches, bends and hole sizes, with live checks against the detector's limits and EN 54-20 sensitivity classes. It produces a materials list and an installation data pack.

Review no.
RS-R716
Revision
C
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working the loop load, the voltage drop and the battery size by hand, and placing detectors to the spacing rules by eye. Mostly free tools from the panel and detector makers, plus a few independent layout tools. Xtralis' ASPIRE designs the sampling pipes for VESDA and FAAST aspirating detectors against EN 54-20. The catch: the makers' tools cover their own kit only, so they help once the manufacturer is chosen, not before.

The catch

Works only for Xtralis VESDA and FAAST FLEX detectors; Windows only; licence terms and price are not on the product page.

Who forFire detection designers and installers working with VESDA, VESDA-E or FAAST FLEX detectors.
By whomXtralisxtralis.com ↗
Releasedto check
Sold innot stated by the maker
PriceNot publishedNo price on the product page; downloaded from the Xtralis document library.

What it replaces

Hand calculation of pipe transport times and hole sizes, and spreadsheet material lists.

Who else does it

Compare all 8 for fire alarm and detection system design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with ASPIRE pipe network design software? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: ASPIRE Pipe Network Design Software, Xtralis

RevDateChange
C11 Nov 2026Re-read at source (hunt run 2026-11-11b): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/aspire-pipe-network-design-software"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>