Driller's Office
Office software for designing drill patterns, sending them to Sandvik surface drill rigs and reporting what was drilled. It sets each hole's position, depth to floor level, angle and direction, shows the pattern on a 3D model of the bench, and guides the rig to each start point so holes need not be marked out by hand.
- Review no.
- RS-R1530
- Revision
- C
- Read at source
- 12 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces marking out the pattern with paint and a tape, and the driller's paper log. Drill patterns designed in the office and sent to the rig, and what was drilled sent back. Sandvik's Driller's Office designs surface patterns on a 3D model of the bench and guides the rig to each hole, so holes are not marked by hand; TIM3D-ready Sandvik rigs only. The catch: each works with its own maker's rigs or one planning program, and none publishes a price.
The catch
Works only with Sandvik surface drill rigs ready for its TIM3D system. Needs a mobile data link to the rig. No price is published.
What it replaces
Drawing drill patterns by hand, measuring and marking hole positions on the bench, and collecting drilling records on paper.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Driller's Office? Tell us how it went
Source and revisions
Source: Driller's Office, Sandvik
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/driller-s-office"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>