Skip to content
REDSTICK⌕

Compare · job: planning drill patterns and recording drilling for rock blasting in quarries · stage: groundworks and substructure

planning drill patterns and recording drilling for rock blasting in quarries, side by side

Every tool on the record for planning drill patterns and recording drilling for rock blasting in quarries: 3 software tools, from Driller's Office, iSURE and MOBA MDS-2000, in alphabetical order. On the record so far, 1 is on sale in the UK and between them they are sold in 14 countries. 3 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 13 November 2026.

ComparingAll 3 toolsChoose which
Show
Scroll right for the rest
Fact
RS-R1530 · SaaS · SandvikDriller's Office
RS-R1651 · SaaS · SandvikiSURE
RS-R1605 · SaaS · MOBA Mobile AutomationMOBA MDS-2000
At a glance
What it doesOffice software for designing drill patterns, sending them to Sandvik surface drill rigs and reporting what was drilled. It sets each hole's position, depth to floor level, angle and direction, shows the pattern on a 3D model of the bench, and guides the rig to each start point so holes need not be marked out by hand.Office software for planning drill and blast rounds in tunnels and underground mines. Plans are built from templates that allow for rock blastability, profile target and explosives, sent to Sandvik iSeries rigs, and the rig's drilling data comes back as dashboards, production reports and per round blast reports, with optional 3D under and overbreak views from the iScan scanner.A guidance system fitted to blast hole drill rigs. The operator sees hole depth, rod count and mast angle against the target; the planned holes come in as a 3D model from Quarry X, and borehole and engine data go live to the office through the cloud.
Who it's forQuarry and rock excavation teams planning drilling and blasting with Sandvik surface top hammer rigs.Tunnelling contractors and underground mines running Sandvik drill rigs: drill and blast engineers, planners and site managers.Quarry and rock excavation contractors drilling blast holes.
The catchWorks only with Sandvik surface drill rigs ready for its TIM3D system. Needs a mobile data link to the rig. No price is published.Built around Sandvik drill rigs and their data; the geology tools and 3D profile scanning are paid options. Price by quote.Hardware fitted per rig. 3D plan import is named for Quarry X only; price not published.
AssessmentReplaces marking out the pattern with paint and a tape, and the driller's paper log. Drill patterns designed in the office and sent to the rig, and what was drilled sent back. Sandvik's Driller's Office designs surface patterns on a 3D model of the bench and guides the rig to each hole, so holes are not marked by hand; TIM3D-ready Sandvik rigs only. The catch: each works with its own maker's rigs or one planning program, and none publishes a price.Replaces marking out the pattern with paint and a tape, and the driller's paper log. Drill patterns designed in the office and sent to the rig, and what was drilled sent back. Sandvik's iSURE plans tunnel and underground rounds for its iSeries rigs and reports each round, with under and overbreak from the iScan as a paid option. The catch: each works with its own maker's rigs or one planning program, and none publishes a price.Replaces marking out the pattern with paint and a tape, and the driller's paper log. Drill patterns designed in the office and sent to the rig, and what was drilled sent back. MOBA MDS-2000 shows the driller depth, rod count and mast angle against the plan and sends borehole data to the office; 3D plans come from Quarry X only. The catch: each works with its own maker's rigs or one planning program, and none publishes a price.
Buying it
Sold in-To check-To checkAustralia, Austria, Brazil, China +10 more
Price shapeBy quoteBy quoteNot published
PricePrice on request from the maker.By quote from Sandvik.No price published; contact MOBA.
MakerSandvikSandvikMOBA Mobile Automation

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.