Skip to content
REDSTICK⌕
SaaSTimber frame and carpentryRoofingCutting lists and carpentry calculations

CutList Optimizer

A browser tool that lays out sheet parts on stock boards to cut waste, allowing for saw kerf, grain and edge banding, and prints the cutting diagrams.

Review no.
RS-R1044
Revision
D
Read at source
8 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the trade's own spreadsheets and the paper cutting list. Small tools for joiners, kitchen fitters, flooring dealers, decorators and irrigation installers. Cutlist Optimizer lays parts on boards to cut waste, with kerf and grain; free with a daily limit. The catch: each fits one trade, and the free ones stop at a quantity or a picture.

The catch

The free plan caps calculations per day and shows adverts; plan prices were not shown on the maker's pages.

Who forJoiners, cabinet makers and fit-out carpenters cutting sheet material.
By whomCutList Optimizer (operator not named)cutlistoptimizer.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceSubscriptionFree plan with a daily calculation limit; Silver and Gold plans monthly or yearly (prices not shown); a 3-day unlock is also sold.

What it replaces

Working out sheet layouts by hand on paper.

Who else does it

Compare all 8 for cutting lists and carpentry calculations side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with CutList Optimizer? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: CutList Optimizer (maker)

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C11 Nov 2026Correction: a missing space restored in the assessment; no words changed.
B11 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A8 Nov 2026First read at source (hunt run 2026-11-08x).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/cutlist-optimizer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>