Skip to content
REDSTICK⌕
SaaSTimber frame and carpentryRoofingCutting lists and carpentry calculations

Blocklayer

A website of free calculators for stair, roof and rafter, deck and joint geometry, some of which print full-size templates to mark and cut from.

Review no.
RS-R288
Revision
C
Read at source
16 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the framing square, the trig on the back of a timber offcut, and the stair worked out three times. Calculators for stairs, roof pitch, rafters and spacing, in the pocket. Cheap and handy. Blocklayer is free on the web, and some calculators print full-size templates to mark from. The catch: geometry only: member sizes still come from the rules or an engineer.

The catch

Geometry only: no structural sizing, so member sizes and spacings still come from local rules or an engineer.

Who forCarpenters, roofers and deck and stair builders setting out cuts.
By whomGreg Tarrant (blocklayer.com)blocklayer.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceFreeFree; donations to a children's charity invited.

What it replaces

Working out rafter and stair geometry with a framing square and tables, and marking cuts by trial.

Who else does it

Compare all 8 for cutting lists and carpentry calculations side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Blocklayer? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Blocklayer, tools for construction (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A8 Nov 2026First read at source (hunt run 2026-11-08x).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/blocklayer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>