Birdsview Concrete
A handheld radar scanner with a position tracker and cloud software that scans concrete walls and slabs and builds a 3D model of the reinforcement, giving each bar's position, diameter, cover and spacing, viewed live on an iPad and exported as reports or 3D files.
- Review no.
- RS-R1783
- Revision
- B
- Read at source
- 14 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces drilling blind and hitting a bar, or breaking out to check cover. Radar, ultrasound and half-cell kit that show the bars, the voids and where the steel is likely corroding. Birdsview Concrete builds a 3D model of the bars, diameters and cover from a tracked radar scan, to about 65 cm; by quote. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.
The catch
It needs an iPad in the field, reads to about 65 cm deep with the current radar, and prices are only by quote.
What it replaces
Breaking out concrete to expose bars, or radar scans read by eye and marked up on paper.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Birdsview Concrete? Tell us how it went
Source and revisions
Source: Birdsview Concrete
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/birdsview-concrete"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>