At a glance
What it doesA handheld radar scanner with a position tracker and cloud software that scans concrete walls and slabs and builds a 3D model of the reinforcement, giving each bar's position, diameter, cover and spacing, viewed live on an iPad and exported as reports or 3D files.A cover meter with a probe and scan cart that finds rebar and measures cover, bar diameter and spacing, showing the bars in a 2D picture for reporting.A handheld ground penetrating radar for concrete that is rolled over a slab, wall or deck and shows what is inside on an iPad: rebar, conduits, pipes, voids. AI auto tagging marks the bars and their depth, and scans can be seen as slices, in 3D or overlaid on the surface in augmented reality.A small handheld radar probe for concrete that is held against soffits, walls and tight corners to find rebar and tendon ducts. An iPad app tags the bars automatically with AI, gives their depth, and shows the scan in 3D or overlaid on the surface in augmented reality, with a report at the end.A small wireless sensor rolled over concrete that finds rebar and measures cover depth and bar diameter, showing the result live on an iPad as line scans, area scans, heat maps and an augmented reality overlay. The app writes a logbook and an instant report and exports the data.A handheld concrete scanner with its own monitor that shows what lies inside a slab or wall, including rebar, tendons, conduits and voids, as top views and cross sections in 2D and 3D. Scans go to PC software for evaluation and documentation.A handheld scanner that shows the layout and depth of rebar on its own screen in plan and section, and records scans. Back at the desk, Hilti's Windows software turns the scans into 2D and 3D views and assessment reports, and can pass the bar positions to Hilti's anchor design software.
Who it's forEngineers and contractors assessing existing concrete before retrofit, coring or cutting, and asset owners planning maintenance.Materials testing laboratories, structural engineers and contractors checking cover on new or existing concrete.Concrete scanning contractors, structural engineers and bridge and car park inspectors, and trades who need to locate bars and services before drilling, cutting or coring.Concrete scanning firms, engineers and installers who need to find bars and ducts before drilling, especially overhead or in confined spots.Structural engineers, concrete testing firms and contractors checking cover on new or existing concrete, and anyone needing safe spots to drill.Contractors and engineers who need to find bars, tendons and services before drilling, coring, sawing or breaking out openings.Structural engineers and repair contractors checking cover and bar layout on existing structures, and installers placing anchors clear of reinforcement.
The catchIt needs an iPad in the field, reads to about 65 cm deep with the current radar, and prices are only by quote.The maker's page says little about the software, data storage or how results are exported. Reads cover to 185 mm. No price published.Needs an Apple iPad. Radar gives depth to the maker's stated plus or minus 5 mm only after calibration on the concrete; the maker itself points to a cover meter as the cheaper tool for first-layer cover. No price published.Needs an Apple iPad. Shallower than the cart-mounted GP8000 (65 cm against 150 cm by the maker's figures), and depth figures hold only after calibration; the maker recommends a cover meter for cover and bar size. No price published.Needs an Apple iPad, and the app runs on subscription. Area scans, heat maps and AR are on the Pro model only. Eddy current reads the steel near the surface: the maker gives cover to 185 mm. No price published.Reads to 300 mm, and Hilti warns accuracy can be significantly affected by site conditions. A costly instrument at a listed GBP 38,628.Reads to 200 mm, and Hilti warns that site conditions can significantly affect accuracy. The analysis software is Windows only. Expensive: listed from 25,025 GBP.
AssessmentReplaces drilling blind and hitting a bar, or breaking out to check cover. Radar, ultrasound and half-cell kit that show the bars, the voids and where the steel is likely corroding. Birdsview Concrete builds a 3D model of the bars, diameters and cover from a tracked radar scan, to about 65 cm; by quote. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. ELE's Advanced Cover Meter measures cover, bar size and spacing to 185 mm with a scan cart. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. Proceq's GP8000 radar rolls over slabs and decks with AI tagging and augmented reality on an iPad; to 150 cm. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. Proceq's GP8800 is a handheld radar probe for soffits and tight corners, to 65 cm, on an iPad. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. Proceq's Profometer PM8000 measures cover and bar size live on an iPad, with heat maps on the Pro model; the app is a subscription. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. Hilti's PS 1000 X-Scan shows rebar, tendons, conduits and voids to 300 mm in 2D and 3D. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.Replaces drilling blind and hitting a bar, or breaking out to check cover. Cover meters and radar that show the bars, their depth and what else is in the slab. Hilti's PS 300 Ferroscan maps bars to 200 mm and passes them to Hilti's anchor design software, from £25,025. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.
Buying it
Sold in-To checkUnited Kingdom, United StatesChina, Singapore, Spain, Switzerland +3 moreChina, Singapore, Spain, Switzerland +3 moreChina, Singapore, Spain, Switzerland +3 moreUnited KingdomUnited Kingdom
Price shapeBy quoteBy quoteBy quoteBy quoteBy quotePurchasePurchase
PriceBy quote: a full subscription, or the scanner bought outright with a software subscription.No price published; request a quote from ELE International.No price published; quote request to the maker.No price published; quote request to the maker.No price published; quote request to the maker. The app is sold on subscription.From GBP 38,628 net on Hilti UK's page; company prices after login, or on Hilti fleet management by monthly fee.From 25,025 GBP discounted net on Hilti UK; company prices after login.
MakerBirdsview AS · NorwayELE International · United KingdomScreening Eagle Technologies (Proceq) · SwitzerlandScreening Eagle Technologies (Proceq) · SwitzerlandScreening Eagle Technologies (Proceq) · SwitzerlandHilti · LiechtensteinHilti · Liechtenstein