Skip to content
REDSTICK⌕
SaaSRoads and pavingPlant and equipmentMeasuring and reporting road milling and soil stabilising output

WIRTGEN Performance Tracker (WPT) for cold milling and WR machines

Tracks Wirtgen cold milling and WR recycler or stabiliser machines with GNSS and, on milling machines, laser scanners, recording milled area and volume, depth and width, fuel, picks, binder and water, truck loads and idle time, shows it live to the operator and the office, and emails Excel and PDF job reports.

Review no.
RS-R1698
Revision
B
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the string line, the dipping rod in the mat and the job record written up from the foreman's notes. The paver steered to the model, the layer measured as it goes down, and the milling and rolling logged as they are done. Wirtgen's Performance Tracker records milled area and volume, depth, picks, binder, water and truck loads on its milling and WR machines and emails job reports; older machines need a retrofit. The catch: most are built around the maker's own machines, and none publishes a price apart from one free app.

The catch

Wirtgen milling and WR machines only; older machines need a retrofit kit fitted; accuracy depends on satellite reception; no price published.

Who forMilling and road recycling contractors and their site and billing staff running Wirtgen machines.
By whomWirtgen GmbH (Wirtgen Group, John Deere)
Germany
wirtgen-group.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedNot published; the package includes hardware, software, GNSS licence and mobile data.
Who elseNone on the record yet

What it replaces

Measuring milled areas by hand after the job and building the billing figures from site notes.

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with WIRTGEN Performance Tracker (WPT) for cold milling and WR machines? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Automatically Measure Milling Performance with the Wirtgen PERFORMANCE TRACKER

RevDateChange
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13b).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/wirtgen-performance-tracker-for-cold-milling-and"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>