Wire Center
Automated reinforcement cell for precast factories. It straightens and cuts rebar from coil and robots place cross bars, longitudinal bars, spacers and lattice girders on the production pallet to the CAD drawing.
- Review no.
- RS-R1645
- Revision
- B
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the gang setting and stripping shutters by hand and marking out the bed with a tape. Robots on automated precast lines that place shutters and magnets from the CAD, strip and clean them, and print the cutting lines on the slab. Progress's Wire Center straightens and cuts rebar from coil and robots place bars, spacers and lattice girders on the pallet to the drawing. The catch: bought as part of a plant, run by the maker's own control software, and no prices.
The catch
Built into a pallet circulation line; the page gives no price or data formats, so the CAD link needs asking about.
What it replaces
Steel fixers cutting, laying and tying mats and lattice girders by hand on each pallet.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Wire Center? Tell us how it went
Source and revisions
Source: Automation of Reinforcement | Progress Maschinen & Automation
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/wire-center"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>