Trimble Groundworks
Machine control for piling and drilling rigs. It guides the rig to each pile position from the 3D design without stakes, controls depth and direction with an automatic stop at the right depth, warns of set avoidance zones, and exports layout and as-built pile reports.
- Review no.
- RS-R1687
- Revision
- B
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the screed works to it. Trimble Groundworks guides piling and drilling rigs to each pile from the 3D design without stakes, stops at depth and exports as-built pile reports. The catch: hardware fitted to each machine, a design model to feed it, and no published prices.
The catch
Needs Trimble GNSS machine control hardware on the rig; avoidance zones are set in Trimble Business Center; no price published.
What it replaces
Pegging out pile positions and measuring depth by hand, and writing pile logs after the shift.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Trimble Groundworks? Tell us how it went
Source and revisions
Source: Trimble Groundworks machine control system, Trimble release
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/trimble-groundworks"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>