TrenchIntel
Machine guidance for trenchers and surface miners. Using RTK GNSS and the project data it holds the cutting line, depth and grade automatically, can steer the machine, warns when the cutter nears a utility on an imported map, and records an as-built map as it digs.
- Review no.
- RS-R1686
- Revision
- B
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the screed works to it. TESMEC's TrenchIntel holds line, depth and grade on its trenchers, can steer, warns near imported utility records and records an as-built as it digs; needs TrenchTronic 5.0 controls. The catch: hardware fitted to each machine, a design model to feed it, and only a few publish a price.
The catch
Needs RTK GNSS and Tesmec's TrenchTronic 5.0 machine controls; collision alerts only work where a utility map has been imported; no price published.
What it replaces
Laser and stake lines for trench grade, and surveying the trench afterwards for as-built records.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with TrenchIntel? Tell us how it went
Source and revisions
Source: TrenchIntel automatic machine guidance system
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/trenchintel"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>