Skip to content
REDSTICK⌕
SaaSEarthworks and excavationExcavation and earthmoving

STX-MC

Machine control software on an in-cab Android tablet that shows the operator the bucket or blade against the design, in 1D, 2D or 3D with GNSS, for excavators, dozers, graders and wheel loaders. Its STX-Cloud web portal sends design files to machines, shows where they are and lets support connect remotely.

Review no.
RS-R1666
Revision
C
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the screed works to it. STONEX's STX-MC runs 1D to 3D guidance on an Android tablet for excavators, dozers, graders and loaders, with a cloud portal; the maker's own pages disagree on swing boom support, priced by licence level. The catch: hardware fitted to each machine, a design model to feed it, and only a few publish a price.

The catch

Runs on Stonex tablets and sensors; swing boom is listed as a feature in STX-MC but the STX-DIG page says it is not yet supported. Price only on request.

Who forGroundworks and earthmoving contractors fitting Stonex machine control to their own excavators, dozers, graders and loaders.
By whomSTONEX srl
Italy
stonex.it ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceBy quotePrice on request from STONEX, by licence level (1D, 2D, 3D) and hardware.

What it replaces

Grade pegs, string lines and a banksman checking levels, and carrying design files to each machine on a USB stick.

Who else does it

Compare all 38 for excavation and earthmoving side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with STX-MC? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: STX-MC Software (STONEX)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/stx-mc"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>