Skip to content
REDSTICK⌕
SaaSCladding and façadesWindows, doors and glazingStructural glass design and calculation

StructuralPro

Web calculator for rectangular laminated glass panes: enter size, edge supports and the glass and interlayer build-up, and get load resistance, stress, deflection, effective thickness and weight as a PDF report.

Review no.
RS-R418
Revision
C
Read at source
9 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces waiting on the glass maker's engineer for a thickness. Glass makers' calculators for stress and deflection under wind, snow and barrier loads. StructuralPro (Eastman) is for rectangular laminated panes with Saflex interlayers. The catch: each covers its own maker's products for standard cases; anything unusual goes to an engineer.

The catch

Rectangular panes and Eastman's Saflex interlayers only, within the limits its disclaimer sets (load types, deflection, temperature range); results come by email as a PDF.

Who forGlazing and facade designers choosing a laminated glass build-up for a panel.
By whomEastman Chemical Company (Saflex and Vanceva)saflex-vanceva.eastman.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedThe page does not state a price.

What it replaces

Working laminated glass effective thickness and stress by hand, or a general finite element run for a simple pane.

Who else does it

Compare all 4 for structural glass design and calculation side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with StructuralPro? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: StructuralPro, Saflex and Vanceva architectural tools, Eastman (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09s).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/structuralpro"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>