Skip to content
REDSTICK⌕
SaaSTimber frame and carpentryJoinery and fit-outStair design and manufacture

StairDesigner

Stair design software: draws the stair in 3D, checks rise, going and headroom, and produces part drawings, full-size templates, cut lists and CNC files.

Review no.
RS-R307
Revision
C
Read at source
8 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces setting out a stair on the workshop floor and checking rise, going and headroom by hand. Design the stair, check it against the regulations, and get the drawings, templates and CNC files to make it. The win is a stair that's right first time, with no recut. StairDesigner draws the stair in 3D with templates, cut lists and CNC files; a lifetime licence from USD 2,795, and a free version without output. The catch: the useful output, production drawings and CNC, sits in the dearer editions.

The catch

The free version designs but does not output cut lists, plans or CNC files; CNC output needs the higher Pro PP edition.

Who forJoinery workshops and stair makers building one-off stairs.
By whomWood Designer Ltd
United Kingdom
wooddesigner.org ↗
Releasednot stated by the maker
Sold in
Europe
  • United Kingdom: on sale
PricePurchaseLifetime licence, two editions (Pro and Pro PP) listed from USD 2,795 to USD 5,295. A free version designs stairs but outputs no cut lists, plans or CNC files.

What it replaces

Setting out stairs by hand with a pitch board and drawing each string and winder on a rod.

Who else does it

Compare all 6 for stair design and manufacture side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with StairDesigner? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: StairDesigner software (maker)

Availability read at: United Kingdom

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A8 Nov 2026First read at source (hunt run 2026-11-08x).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/stairdesigner"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>