Skip to content
REDSTICK⌕
SaaSRoofingRoof wind load design for roof systems and edge metal

Roof Wind Designer

A web calculator that works out the design wind loads on a roof to the ASCE 7 standard (2005, 2010, 2016 or 2022 edition) and turns them into minimum recommended wind resistance loads for the roof system and for edge metal flashing, so a roof system with a matching wind rating can be chosen.

Review no.
RS-R1807
Revision
B
Read at source
14 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the cable sizing tables, the protection coordination done by hand and the code book open on the desk. Calculations for one engineering question at a time: cable size, protection, lightning risk, roof wind load. NRCA's Roof Wind Designer turns ASCE 7 wind loads into the rating a roof system and its edge metal need; free at present, US practice, common building types only. The catch: the answer is only as good as the installation conditions you enter, and it is still the designer who signs it off.

The catch

It covers only the ASCE 7 methods for common building types and heights, so unusual buildings still need an engineer, and it gives loads, not a manufacturer's approved assembly.

Who forRoofing contractors, roof consultants and designers working to US building codes on low rise and mid rise buildings.
By whomNational Roofing Contractors Association (NRCA)roofwinddesigner.nrca.net ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceFreeFree at present; registration offered.
Who elseNone on the record yet

What it replaces

Working through the ASCE 7 wind load procedures by hand or spreadsheet for each roof zone.

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Roof Wind Designer? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Roof Wind Designer (NRCA)

RevDateChange
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A14 Nov 2026First read at source (hunt run 2026-11-14).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/roof-wind-designer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>