Skip to content
REDSTICK⌕
RobotConcretePrecast and modularPrecast shuttering and production robots

Plotter E9

A self propelled, battery powered marking machine for hollow core beds that prints cutting lines, openings, reservations and element IDs onto fresh slabs from production data, with laser positioning and obstacle sensors.

Review no.
RS-R887
Revision
D
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the gang setting and stripping shutters by hand and marking out the bed with a tape. Robots on automated precast lines that place shutters and magnets from the CAD, strip and clean them, and print the cutting lines on the slab. Elematic's Plotter E9 prints cutting lines, openings and IDs on fresh hollow core slabs on its own battery. The catch: bought as part of a plant, run by the maker's own control software, and no prices.

The catch

Automatic mode needs the maker's FloorMES control module, and a direct link to design software needs a further module.

Who forHollow core and half slab plants on long line casting beds.
By whomElematicelematic.com ↗
Releasednot stated by the maker
Sold in
Europe
  • Finland: on sale
PriceBy quotePrice not published.

What it replaces

Marking out slabs by hand with tape, chalk and paint before sawing and coring.

Who else does it

Compare all 8 for precast shuttering and production robots side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Plotter E9? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Plotter E9, Elematic

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C12 Nov 2026Re-read at source (hunt run 2026-11-12b): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A10 Nov 2026First read at source (hunt run 2026-11-10s).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/plotter-e9"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>