Skip to content
REDSTICK⌕
SaaSRoofingRoof design and specification to a manufacturer's system (tiles, fixings, tapered insulation)

MetSPEC

A Windows design program that sizes cold-rolled purlins, side rails and mezzanine joists from Metsec's range and prints the calculations and load tables.

Review no.
RS-R363
Revision
C
Read at source
9 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working out a tile fixing specification from BS 5534 by hand, and hunting for the right data sheet. Free tools and apps from the roofing makers: fixing specifications, take-offs, specification clauses and data sheets for their own products. The win is a compliant spec in minutes. MetSPEC sizes Metsec purlins, side rails and mezzanine joists and prints the calculations; free, Windows only. The catch: each covers its own maker's products only, and the result is yours to check: it's the contractor's name on the roof.

The catch

Windows only and must be run as administrator; designs Metsec sections only.

Who forStructural engineers, steel frame and cladding contractors specifying Metsec purlins under roof sheeting.
By whomvoestalpine Metsecmetsec.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceFreeDescribed by the maker as free to download.

What it replaces

Reading span and load tables by hand and writing purlin calculations separately.

Who else does it

Compare all 8 for roof design and specification to a manufacturer's system (tiles, fixings, tapered insulation) side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with MetSPEC? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Purlins and Side Rails: Software, voestalpine Metsec (maker)

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09r).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/metspec"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>